Pullers and Installers
Showing 25–36 of 43 results
-
Rear Axle Bearing Puller Set
$85.00Part No: 91800
Rear Axle Bearing Puller Set
$85.00Designed to remove flange type, semi-floating rear axle bearings in most late model, rear-wheel drive cars and light-trucks.
• Includes 3 bearing pullers with a range from 1″ up to 2-7/8″
• For flange-type, semi-floating bearings
• Designed to capture rear axle bearings firmly
• Comes in a blow-molded caseQuick View -
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17Part No: 951
Two & Three Jaw Combination Reversible Puller, 7″ Spread
$82.17These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
FEATURES
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 7″ spread, 9/16″ center screw – 20″ x 6-3/8″
Also, available:
134, 2-Ton, Two & Three Jaw Combination Puller
3 1/2″, 4″ spread, 3/8″center screw – 24″ x 4-1/4″952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″Quick View -
Bearing Splitter-Medium
$81.77Part No: 509
Bearing Splitter-Medium
$81.77• Designed to remove and pull bearings in tight areas
• Capacity 3″ to 4-1/2″
• Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
• Split and separate bearings where puller jaws cannot be used
• Made from industrial strength steelQuick View -
Adjustable Bearing, Seal Driver
$75.00Part No: 506
Adjustable Bearing, Seal Driver
$75.00FEATURES
All in one design eliminates the need for a driver and different size adapters
Locking screw holds the adjustable jaws in place for one hand use
Durable sturdy aluminum construction, equipped with a steel capped striker shaft handle
4-stepped jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18mnm – 90mm)Quick View -
Pilot Bearing Puller with Slide Hammer
$64.09Part No: 28
Pilot Bearing Puller with Slide Hammer
$64.09FEATURES
- Removes bearings or bushings on flywheel pump generatoretc.
- Includes 1⁄2in to 1 3⁄8in (13mm to 32mm) I.D. capacity jaws.
- Includes 3lb. Slide Hammer
Quick View -
Bearing Splitter, 4 1/4″ Capacity
$61.65Part No: 503
Bearing Splitter, 4 1/4″ Capacity
$61.65FEATURES
- For removing generator gears bearing cones bearings and similar parts that ordinary puller jaws cannot reach.
- Knife edges are flush on one side for easy pulling. Bolts are heat treated for added strength.
- No. 503 Bearing Splitter for use with Puller
- No. 943 Capacity: 0″ to 41⁄4” (108mm) 5⁄8, 18 Holes
Quick View -
5 1/2″ Adjustable Two-Jaw Puller with 6″ Spread
$60.82Part No: 942
5 1/2″ Adjustable Two-Jaw Puller with 6″ Spread
$60.82• Designed with forged yokes, heat treated jaws, and plated for years of dependable use.
• Center screws heat treated and finished in black oxide.
• 5 ½” Adjustable 7î spread, Center Screw 9/16″ – 20 x 6 3/8 in., 5 TonOut of stock
Quick View -
Two & Three Jaw Combination Puller, 4″ Spread
$54.57Part No: 134
Two & Three Jaw Combination Puller, 4″ Spread
$54.57These versatile pullers can be used as either a 2 or 3 jaw puller simply by changing the jaws on the yoke.
FEATURES
- Pullers have standard threads, zinc, and black oxide finish
- Yoke and jaws are forged, and all components heat-treated
- 4″ spread, 3/8″center screw – 24″ x 4-1/4″
Also, available:
951 Two & Three Jaw Combination Reversible Puller
3-1/2″, 7″ spread, 9/16″ center screw – 20″ x 6-3/8″952, 5-Ton, Two & Three Jaw Adjustable Combination Puller
5-1/2″, 8″ spread, 9/16″ center screw- 20″ x 6-3/8″Quick View -
Bearing Splitter, Small
$53.74Part No: 508
Bearing Splitter, Small
$53.74• Designed to remove and pull bearings in tight areas
• Capacity 1-1/4″ to 2-1/4″
• Removes thin faced & cone shape gears, with a beveled edge that can be easily placed behind part to secure gripping surface
• Split and separate bearings where puller jaws cannot be used
• Made from industrial strength steelQuick View -
Pilot Bearing Puller
$53.15Part No: 31
Pilot Bearing Puller
$53.15FEATURES
- When working space is limited this puller is needed to remove flywheel pilot bearings from automobile trucks and tractors.
- Can also be used to pull bushings or bearings from generators or starters.
- Only 7 1⁄2in long.
- Includes 1⁄2in to 1 1⁄4in I.D. capacity jaws.
Quick View -
Bolt Retained Cup Installer
$48.65Part No: 18510
Bolt Retained Cup Installer
$48.65Makes fast and easy work of installing bolt retained bearing cups of 1610 to 1880 universal joints commonly found of class 6 8 vehicles. Uses the bolt holes of the flange to ensure proper alignment of the cup and eliminates damage often caused by common installation methods.
• Easily and quickly installs the U joint bearing cups on series 1610 1880 yokes on class 6 8 vehicles
• Two guide bolts, utilizing the bolt holes of the yoke, to effortlessly achieve the proper alignment every time
• Eliminates damage to cups, seals, or needle bearingsApplications:
1610 1880 Series full round yokes/Class 6 8 vehiclesComponents:
18511 Bolt Retained Body
18512 Center Screw
18513Guide Bolts (2)Quick View -
Seal Puller
$42.69Part No: 49600
Seal Puller
$42.69This heavy duty seal puller removes metal or rubber, full lip seals.
Cone adapter is recessed to hold screw and locks screw into place enabling shaft to turn by handle to force screw through seal.
A 17-in. long shaft enables high pulling force.Quick View