CALL: 800-537-1077
INNOVATION, DEPENDABILITY, QUALITY SINCE 1939

Suspension and Wheel

Showing 1–12 of 34 results

  • HUB WHEEL BEARING MASTER SERVICE SET

    $499.00

    Part No: 94000CV

    HUB WHEEL BEARING MASTER SERVICE SET

    $499.00

    Removes and Installs wheel hubs, bearing races and bearings.

    Quick View
  • Ball Joint Super Set

    $370.00

    Part No: 197

    Ball Joint Super Set

    $370.00

    FEATURES

    • This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks vans and SUVs through 2003; Dodge light trucks through 1998; Dodge vans Durango and Dakota through 2003; and Honda Accord Civic del Sol and Prelude through 2001.
    • C-frame tool can be used alone to remove and replace universal joints
    • Comes complete in durable case
    Quick View
  • Floor-Mounted, 2,200 lbs. Spring Compressor

    $345.00

    Part No: 91300

    Floor-Mounted, 2,200 lbs. Spring Compressor

    $345.00

    The heavy-duty construction and Adaptive Spring Bracket allow the user to single-handedly compress many of the strut assemblies found on passenger cars, light-trucks, vans, and SUV’s.

    FEATURES

    •  Adaptive Spring Bracket can be configured in multiple configurations
    • For strut assemblies with spring coils 3.5″ to 8.75″ wide
    •  Accepts maximum spring height of 19″
    • Can be used with varying coil diameters up to 5/8″
    • Easy, one-person use
    • Can be mounted to the floor (hardware not provided)
    Quick View
  • SHEPPARD M100 PITMAN ARM PULLER

    $199.00

    Part No: 18620

    SHEPPARD M100 PITMAN ARM PULLER

    $199.00

    Our M100 Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from Sheppard M100 steering gears found on many class 6 –8 vehicles.

    • Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
    • Constructed of high-strength materials for increased pulling power and superior durability
    • Rated for usage with up to a ¾” drive impact wrench
    • Simple and effective design with a wide application range

    Applications: Class 6 –8 vehicles, including but not limited to highway transportation vehicles, buses, RVs, and other equipment

    Warranty: Limited Lifetime Against Defects

    Out of stock

    Quick View
  • Ball Joint Super Set

    $193.89

    Part No: 196

    Ball Joint Super Set

    $193.89

    Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins

    FEATURES

     

    Contains:

    • 3 receiver tubes
      • 2- 3/4″ ID X 3″ OD
      • 2- 1/4″ ID x 2 1/2″ OD
      • 1- 3/4″ ID X 2″ OD
    • Installation and removing adapters
      • 1 installing cup
      • 1 receiving cup
      • 1 installing adapter
    Quick View
  • Wheel Bearing Replacement Set Adapters

    $166.91

    Part No: 904

    Wheel Bearing Replacement Set Adapters

    $166.91

    FEATURES

    • Replace wheel bearings on front-wheel drive cars and light trucks without having to remove the steering knuckle and strut assembly
    • Eliminates the need for a front-end alignment once completed
    Quick View
  • Intermediate Pitman Arm Puller

    $155.00

    Part No: 18640

    Intermediate Pitman Arm Puller

    $155.00

    Our Intermediate Pitman Arm Puller is an easy and safe method for quickly removing difficult or seemingly seized pitman arms from the steering gear found on many medium-duty vehicles.

    • Replaces less effective, dangerous, and often destructive methods used for removing pitman arms
    • Constructed of high-strength materials for increased pulling power and superior durability
    • Rated for usage with up to a ½” drive impact wrench
    • Simple and effective design wide a wide application range

    Applications: Heavy-duty pickups (1-ton and 2-ton), medium-duty trucks, box trucks, cab-and-chassis, and school buses

    Warranty: Limited Lifetime Against Defects

    Quick View
  • Front End Service Kit

    $150.00

    Part No: 185

    Front End Service Kit

    $150.00

    The Front End Service Kit Includes five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles.

    FEATURES

    Contains:

    • A large and small Pitman arm puller for ball Joint applications.
    • Three different tie rod pullers.
    • Two ball joint separators.
    • Comes in a sturdy blow molded case
    Quick View
  • 12 Point Metric Axle Nut Socket Set, 8 PC

    $145.00

    Part No: 976

    12 Point Metric Axle Nut Socket Set, 8 PC

    $145.00

    FEATURES

    • This set features eight heavy-duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep, Audi, Volkswagen, and BMW as well as many other makes
    • Includes socket sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm
    • Comes with a durable blow-molded case
    Quick View
  • 6 Point Axle Nut Socket Set, 8 Piece

    $143.49

    Part No: 966

    6 Point Axle Nut Socket Set, 8 Piece

    $143.49

    FEATURES

    • Features eight 1/2″, 6-point, deep alloy sockets ideal for use in removing and installing axle nuts on a wide variety of domestic and import cars, trucks, and SUV’s
    • The extra-long design ensures complete contact between the nut and socket and prevents slipping or distortion of the axle nuts during application
    • Sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, and 39mm
    Quick View
  • 4WD Locknut Socket Set, 6 Piece

    $139.08

    Part No: 839

    4WD Locknut Socket Set, 6 Piece

    $139.08

    This high-quality steel, six-piece socket set features 1/2” square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications.

    FEATURES

    Includes:

    • 4-lug socket
    • 6-lug socket
    • Toyota, 4-lug locknut socket
    • Ford, 4-lug locknut socket
    • FWD front spindle puller
    Quick View
  • Hub Puller

    $135.00

    Part No: 94800

    Hub Puller

    $135.00

    FEATURES

    • Removes wheel hubs mounted on tapered axles and press fit rear brake drums
    • Can be adjusted by legs to an 8″ diameter bolt circle
    • Heavy-duty construction, made of alloy steel and drop forged
    • Center screw: 1″-14″ x 9″  Hex Head: 1″-1/8″
    Quick View